Aller au contenu

Kit 1M Raze par RevoZsport photos + video Sema show 2011!!


Elitt13

Messages recommandés

Je ne sais pas si quelqu'un d'entre vous sont familiers avec cette compagnie encore, mais ils ne certaines composantes assez impressionnant en fibre de carbone aéro (fonctionnelle et pour l'apparence) pour les voitures haut de gamme comme Ferrari, Lamborghini, etc, et apparemment ils sortent avec une ! kit complet pour le 1M On me dit qu'il comprend les bits suivants fibre de carbone:

Splitter avant intégrant des conduits de refroidissement des freins

Capuche léger avec grilles d'aération fonctionnelles

Remplissez le toit de remplacement du carbone (adhésif également disponible)

Jupes latérales

Aileron arrière de toit

Tronc Léger

Aileron arrière

L'aile arrière de style GT

Racing diffuseur arrière de style

Cartes de portes intérieures

Si leurs travaux précédents est une indication,

cf google traduction :oops:

img-361274-1-4c59d569-52e7-5b36.jpg

post-913-0-42927800-1311700124.jpg

voici une précédente production

IMG_2156.JPG

Lien vers le commentaire
Partager sur d’autres sites

Lien vers le commentaire
Partager sur d’autres sites

  • 2 semaines plus tard...

voici les photos, je craque .....

je veux tout!!!!

home_p1.pnghome_p2.png

La Raze RevoZport 1M est axé sur l'amélioration de la déjà stellaires BMW M Série 1, améliorant encore sa puissance-à-poids et l'efficacité aérodynamique. Tous les produits sont conçus sur le principe que la forme doit suivre la fonction. La réduction du poids est la principale priorité à une réduction de poids total de 60 kg atteint grâce à l'utilisation massive de produits en fibre de carbone composite. La Raze 1M est la combinaison ultime de la performance, le style et la manutention.

1m_gallery_01.jpg

1m_gallery_02.jpg

1m_gallery_03.jpg

1m_gallery_04.jpg

1m_gallery_07.jpg

1m_gallery_05.jpg

1m_gallery_06.jpg

1m_gallery_08.jpg

1m_gallery_09.jpg

1m_gallery_10.jpg

1m_gallery_11.jpg

1m_gallery_12.jpg

1m_gallery_13.jpg

Lien vers le commentaire
Partager sur d’autres sites

Sans oublier les tarifs...

Front grill (B E82 2 000 A300) : $250 174€*

Lightweight Bonnet (B E82 2 RAZ A200) : $1290 898€*

Front Splitter (B E82 2 RAZ A110) : $900 627€*

Front Splitter Brake Duct Kit (B E82 2 RAZ A120) : $500 348€* (FRP) $650 452€* (carbon)

Side Skirt (B E82 2 RAZ B100)

Lightweight Trunk (B E82 2 RAZ C200) : $600 418€* (FRP) $900 626€* (Single Sided Carbon) $1190 828€* (Double Sided Carbon)

Trunk Lip Spoiler (B E82 2 RAZ C320) : $499 347€*

GT Spoiler with mount (B E82 2 RAZ C310)

Roof Spoiler (B E82 2 RAZ C300) : $780 543€*

Lightweight Roof Panel (B E82 2 RAZ B400) : $1500 1044€*

Mirror Covers (B E82 2 RAZ B200) : $290 202€*

Rear Diffuser (B E82 2 RAZ C110) : $780 543€*

Interior Door Cards Front Pair (B E82 1 000 B200) : $950 661€*

Interior Door Cards Rear Pair (B E82 1 000 B210) : $800 557€*

* Taux de conversion utilisé : $1 = 0.696240€

Lien vers le commentaire
Partager sur d’autres sites

Belle remarque Elitt !!! Hromis le côté esthétique... cela fait cher du kg !!! Autant se payer une belle côte de boeuf et prendre sa 1M pour aller la déguster !!! c'est moins cher au kilo !!!

Lien vers le commentaire
Partager sur d’autres sites

  • 2 mois plus tard...

voici les modifications et les photos!!

BMW 1M RAZE P450 Performance System

Making the M a MORE powerful letter

Custom Performance Enginering & RevoZport

BMW creates the ultimate driving machines, no doubt - but its limited to what a manufacturer can run on the road.

We are not.

Introducing the 1M RAZE P450 performance package for the BMW 1M vehicles.

A complete setup featuring a full power package engineered and manufactured by Custom Performance Engineering and a full carbon fiber outfit for weight reduction by RevoZport.

The result - 450whp and over 130lbs in weight reduction.

Unveliing the fully outfitted BMW 1M vehicle at SEMA at booth 21732 - we are proud to give the 1M owners a little something more with which to push their cars to the limit in the real M fashion.

The SEMA vehicle dubbed the "Black Knight", sponsored by a slew of high profile manufacturers like Forgeline, Moton and Performance Friction Brakes and built by cp-e™ and Piper Motorsports and wrapped in satin black by Skinz Wraps.

Full details following release at SEMA 2011 on Nov 1.

1M Raze P-450 Kit:

- cp-e upgraded front mount intercooler

- cp-e charge pipe w Tial blow off valve

- cp-e dual cone air intake

- cp-e catless down pipes

- cp-e full-race exhaust

- Alcohol Injection Systems trunk mounted meth-injection system

- Custom engine and fuel management tune

- RevoZport 1M RAZE carbon fiber vented hood

- RevoZport 1M RAZE carbon fiber 2-piece adjustable front splitter w integrated brake cooling ducts

- RevoZport 1M RAZE carbon fiber side skirts

- RevoZport 1M RAZE carbon fiber trunk

- RevoZport 1M RAZE carbon fiber trunk spoiler

- RevoZport 1M RAZE carbon fiber roof spoiler

- RevoZport 1M RAZE carbon fiber GT race wing

- RevoZport 1M RAZE carbon fiber rear diffuser with ground effect panel

- RevoZport 1M RAZE carbon fiber interior door panels

Other parts and modifications:

- AeroCatch racing hood latches

- IND blacked out side markers

- Piper Motorsport custom roll-cage and rear seat delete

- Moton Club Sport double adjustable remote reservoir coilover suspension

- AST race springs

- Turner Motorsport coilover mounts

- Vorshlag camber plates

- Forgeline GA3R 3-piece forged racing wheels

- Turner Motorsport 15mm spacers

- Turner Motorsport front and rear tow hooks

- Toyo R888 racing tires 18x12 / 18x11

- Performance Friction Z-Rated big brake kit w stainless lines

- Performance Friction RH665 racing brake fluid

- Sparco Pro2000 racing seats and mounts

- Sparco 6-point racing harnesses

- Ultimate Pedals custom racing pedals

- The Shop custom powder coating and body work

- Helix Films vinyl wrap

- SkinzWraps vinyl install and custom logos

source from:

http://cp-e.com/1M/Media.html

Video:

http://youtu.be/accYWSW5IjE?hd=1

P1240270.jpg

P1240301.jpg

P1240311.jpg

P1240315.jpg

P1240316.jpg

P1240317.jpg

P1240319.jpg

P1240323.jpg

P1240325.jpg

P1240327.jpg

P1240329.jpg

P1240334.jpg

P1240335.jpg

P1240514.jpg

P1240515.jpg

P1240516.jpg

P1240519.jpg

P1240520.jpg

P1240524.jpg

P1240529.jpg

P1240530.jpg

P1240531.jpg

P1240534.jpg

P1240536.jpg

P1240538.jpg

P1240540.jpg

P1240541.jpg

P1240544.jpg

P1240548.jpg

P1240326.jpg

Lien vers le commentaire
Partager sur d’autres sites

d'autre infos

SEMA Show 2011 - BMW Série 1 M Coupé P450 RevoZport

RevoZport a finalement terminé son projet Raze 1M P450 pour le SEMA qui est basé sur la BMW Série 1 M Coupé.

img-387072-1-sema_2011_revozport_1M_raze_p450_001.jpg

Les ingrédients principaux sont une amélioration poids/ puissance et aérodynamique. Sur la masse , une réduction de poids total de 60 kg est atteint grâce à l'utilisation de fibre de carbone sur le kit carrosserie complet noir mat.

img-387072-2-sema_2011_revozport_1M_raze_p450_018.jpgimg-387072-3-sema_2011_revozport_1M_raze_p450_008.jpg

En ce qui concerne la performance du moteur d'une puissance maximale atteins 450 chevaux grâce à des filtres sport un nouvel échangeur et un ECU moteur reprogrammé.

img-387072-4-sema_2011_revozport_1M_raze_p450_005.jpg

L'échappement en titane en provenance du Japon et ne pèse que 7 kg et les jantes forgées taillent dans un diamètre de 20 pouces.

Lien vers le commentaire
Partager sur d’autres sites

  • 2 mois plus tard...

derniéres news de revosport

Press Release 19th Jan 2012

Following the launching of the 1M RAZE aero and lightweight kit in August 2011. We are delighted to present here our lightweight program for the BMW 1 series M.

The complete 1M RAZE aerokit consist of the following.

- Carbon Front Splitter with 3 downforce adjustment

- Carbon Front Brake Cooling Duct

- Carbon Front Grill

- Carbon Lightweight Bonnet with Cooling Vents

- Carbon Replacement Roof Panel

- Carbon Roof Spoiler

- Carbon Lightweight Trunk

- Carbon Trunk Spoiler

- Carbon Rear Diffuser with Ground Effect Panel

- Carbon Side Skirts

- Carbon Interior Door Panels

- Titanium Cat Back Exhaust System (Race Version)

With the technology of dry vacuum infusion technology, these are proven to shave 60kg off from the original 1M. All products are design to function like cooling and aerodynamic downforce.

1MRAZECompleteKit05.jpg

1MRAZECompleteKit17.jpg

1MRAZEPicture6.jpg

1MRAZEPicture4.jpg

1MRAZEPicture1.jpg

1MRAZEPicture3.jpg

Lien vers le commentaire
Partager sur d’autres sites

×
×
  • Créer...